Water Softener and Reverse Osmosis Filters

We know first hand how important clean, healthy water in the home is. That’s why we carry Pentek® and other leading brands of water filtration products. 
Whether you need drinking water filters and sediment filters, under-the-sink and point-of-use, or housings and cartridges that range from 0.5 to 100 microns, call us with your filter numbers for pricing.


Pentek P5 - spun polypropylene filter cartridge reduces sediment; 5 micron; 2 1/2 inches x 9 7/8 inches


Pentek P1-20 - spun polypropylene filter cartridge reduces sediment; 1 micron; 2 1/2 inches x 20 inches


Pentek CB1-10C Carbon Block

This Filter Cartridge is a 10" water filter replacement for use in various under sink filter systems, counter top filter systems, and more. The Pentek CB1-10 carbon block filter captures numerous contaminants including chlorine, pesticides, cysts (Giardia, Cryptosporidium, etc), sediment, dirt, rust, limescale, silt, sand, as well as other chemicals and particulates to improve the taste, odor, clarity, and purity of water.

Pentek CB1-10 Carbon Block Filter Specifications:

  • Temp. Range: 40 - 180 F
  • Micron Rating: 1 micron
  • Dimensions: 9 3/4"L x 2 7/8"W
  • Filter Media: Extruded carbon block
  • Flow Rate: About 1 gallon per minute (1 GPM), though the flow rate will vary slightly according to the filter system used
  • Filter Life: Approx. 3 months or 1,500 gallons - filter should be replaced when a decrease in water pressure is noticed

The Pentek CB1-10 will fit all 10" x 2.5" water filter housings. In many cases the use of a sediment pre filter prior to the use of this filter will extend its life. The CB1-10 filter is also known by Pentek part number 255382-43 / 25538243.


Activated Carbon Cartridge - Part #S7025

This cartridge is designed for the removal of chlorine, tastes and odors from safe potable drinking water supplies.

This cartridge should be changed approximately every six months or when objectionable tastes or odors return.


Sediment / Carbon Prefilter Cartridge - Part #S7028; 5 micron activated carbon cartridge


This cartridge is designed for the removal of chlorine, tastes and odors from safe potable drinking water supplies.

This cartridge should be changed when objectionable tastes and odors return, excessive pressure drop occurs, or approximately every six months.


Pentair TLC-36

The Pentair TLC-36 RO Membrane Replacement 36 GPD is a reverse osmosis membrane element designed to reduce impurities sometimes found in drinking water. This industry leading RO element is designed with a state of the art TLC (thin layer composite) membrane for residential use. All RO membranes are required to meet strict performance requirements before being shipped. 

This TLC-36 filter's standard dimensions (1.79" x 11.75") allow it to fit in common housings, increasing its versatility. The RO membrane also has a 100% dry membrane maximizing shelf life and high rejection stability at high input TDS (total dissolved solids). This reverse osmosis membrane also has a flow rate of 36 gpd, which allows it to lower the amount of impurities in water.

Pentair TLC-36 RO Membrane Replacement 24 GPD specifications:

  • Max. Pressure: 100 psi (6.90 bar)
  • Dimensions: 1.79" x 11.75"
  • Flow rate: 36 gpd (136 lpd)
  • Free Chlorine: 0.1 ppm
  • Max Temp: 120�F (49�C)
  • Rejection: 98%
  • pH Range: 4-11



Dow Filmtec TW30-1812-24 Reverse Osmosis Membrane Specs: Dimensions: 1.75" W X 11.75" L Maximum Operating Temperature: 113?F (45?C) TW30-1812-24 ΔP (psig) @ Flow Rate (gpd): 50 psig @ 24 gpd (Permeate flows for individual elements may vary +/- 20%) Maximum Operating Pressure: 300 psig (21 bar) Maximum Feed Flow Rate: 2.0 gpm (7.6 lpm) Maximum Feed Silt Density Index (SDI): 5 Free Chlorine Tolerance: (Maximum temperature for continuous operation above pH 10 is 95?F (35?C)) pH Range, Short Term Cleaning (30 min.): 1-12 Dow Filmtec TW30-1812-24 Reverse Osmosis Membrane Materials of Construction: Membrane Type: Polyamide Thin-Film Composite